2024 Manitou Group Articulated Loaders MLA 7-75 H-Z
- Year 2024
- Make Manitou Group
- Model Articulated Loaders
- Engine TD_3_6_L4
2024 Manitou Group Articulated Loaders MLA 7-75 H-Z
2024 Manitou Group Articulated Loaders MLA 7-75 H-Z
The Manitou MLA 7-75 is the largest wheel loader in the range with a standard lift arm. Similar to the smaller units, this machine did not make compromises in terms of comfort and performance! The hydrostatic transmission is smooth at low speed and very powerful in demanding circumstances. With gearshift and 100% diff lock controls on the joystick, the operator is always in control. The Z-bar loader linkage gives you the extra break-out force, return to dig and parallel guidance. Whether in agricultural or in construction environment, this wheel loader performs at its best in tough conditions and never lets you down.
Engine
Engine Manufacturer
Deutz
Emissions
Stage 3B
Engine
TD_3_6_L4
Cylinder Liners
4 - 220 in³
Engine Power
74.30 Hp / 55.40 kW
Engine Torque, Maximum
330 Nm / 1600 rpm
Cooling System
2 water radiators + hydraulic oil
Drivetrain
Transmission
Hydrostatic
Gears
Number of gears (forward / reverse): 2 / 2
Differential Lock
Front and rear locking of the machine
Brakes
Parking Brake
Manual
Operational
Top Speed
Laden: 12 mi/h| Max.: 19 mi/h
Operating Conditions
Breakout force with bucket: 5906 daN | Vibration to whole hand/arm: < 2.50 m/s²
Hydraulics
Hydraulic Pump
Gear pump
Hydraulic Flow
70 l/min | High-Flow: 110 l/min
Maximum Pressure
2901 PSI | Drive hydraulic system: 5511 PSI
Dimensions
Dimensions
Tilt-down angle: 45 ° | Tilt-up angle: 45 ° | Articulation angle: 45 °
Wheelbase
6 ft 9 in
Ground Clearance
1 ft
Overall Width
of 4 posts canopy: 4 ft 2 in | Cab: 4 ft 2 in | Less Bucket: 5 ft 9 in
Overall Height
With FOPS removed and ROPS folded: 6 ft 6 in | with 4 posts canopy: 8 ft 2 in | Cab: 8 ft 2 in
Overall Length
Less Bucket: 14 ft 7 in
Lift Height
Max. (below forks): 10 ft 9 in
Height
Max. of bucket pivot point: 11 ft 5 in
Capacities
Load Capacity, Land
Static tipping load with bucket (straight): 7447 lbs | Static tipping load with bucket (full turn): 5778 lbs | Static tipping load with forks (straight): 6043 lbs | Static tipping load with forks (full turn): 4793 lbs
Oil capacity
Hydraulic: 20 US gal
Fuel Capacity
27 US gal
Weights
Unloaded Weight
(with forks) with 4-post canopy: 10540 lbs | With Forks: 10919 lbs