Metroquip

  • 1355 Canton Road
  • Marietta, GA 30066
  • Call Us: (770) 422-4218
  • https://www.metroquip.com/
Print This Page

2024 Manitou Group Construction Telehandlers ULM 415 H

Information

2024 Manitou Group Construction Telehandlers ULM 415 H

The ULM telehandler is designed to help you save time and money. It is adapted to many types industries: lanscaping companies, riding schools, building companies... Thanks to its 1.25 t or 1.5 t capacity (2 models are available), the ULM can easily place pallets of blocks or bricks, straw or hay bales... Its ultra compact dimensions and rough terrain abilities make this machine particularly adapted to work in tight spaces on all types of grounds. Due to its lightweight, the ULM can also easily be transported on a small trailer. If you need to fully adapt your machine to your environment, numerous options are available: the auto reversing fan, the air prefilter, a full range of tyres...

Photos

Highlights

  • Marietta, Georgia
  • 2024
  • Manitou Group
  • Construction Telehandlers ULM 415 H
  • norm: Stage V / Tier 4 final | Model: 3TNV88C-DMU
  • Type: Hydrostatic | Max. travel speed (may vary according to applicable regulations): 16 mi/h
  • Available
  • Reach at max. height: 3 ft 3 in

Specifications

  • 2024
  • Manitou Group
  • Construction Telehandlers
  • ULM 415 H
  • General
  • norm: Stage V / Tier 4 final | Model: 3TNV88C-DMU
  • Yanmar
  • 3 - 100 in³
  • 35.10 Hp / 26.20 kW
  • 105 Nm @1950 rpm
  • 3 radiators (water + hydraulic oil + fuel)
  • Type: Hydrostatic | Max. travel speed (may vary according to applicable regulations): 16 mi/h
  • Number of gears (forward / reverse): 2 / 2
  • JSM
  • Limited slip differential on front and rear axles
  • Automatic negative parking brake
  • Service: Hydraulic servo brake
  • CAMSO - MPT 552 - 10.0/75-15.3 124A8
  • CAMSO - MPT 552 - 10.0/75-15.3 124A8
  • Breakout force with bucket: 1880 daN | Lifting: 8.80 s | Lowering: 7 s | Extension: 6.40 s | Retraction: 4.30 s | Crowd: 3.40 s | Dump: 2.60 s | Drawbar pull (Laden): 2000 daN | Vibration to whole hand/arm: < 2.50 m/s²
  • Noise at driving position (LpA) tested following NF EN 12053 norm: 76 dB | Environmental noise (LwA): 104 dB
  • Gear pump
  • 48 l/min
  • 3408 PSI
  • Safety cab homologation: Cabin ROPS - FOPS Level 1
  • Max. outreach: 8 ft 7 in | Tilt-down angle 116 ° | Tilt-up angle 23 ° | Front overhang: 2 ft 6 in
  • Max: 14 ft 1 in
  • to carriage (with hitch): 11 ft 5 in
  • 11 in
  • 7 ft
  • 4 ft 11 in | cab: 2 ft 2 in
  • 6 ft 4 in
  • External turning radius (over tyres): 8 ft 7 in
  • Reach at max. height: 3 ft 3 in
  • Max: 3307 lb
  • Hydraulic oil: 10 US gal
  • 9 US gal
  • Shipping mass (min. / max.): 5952 lb / 6393 lb